Introduction of PAGOODA varistor:
❤ 收藏

Introduction of PAGOODA varistor:

Introduction of PAGOODA varistor:

Series: MYD, MYG, MYL, MYT1

Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10%

Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters:

Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit;


The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA.


PAGOODA high-end technology electronic components manufacturers, varistor specifications are complete, can provide samples, quality assurance, comprehensive technical support, welcome to inquire


1.00
¥1.00
¥1.00
重量:0.01KG
数量:
(库存99999)
立即购买
加入购物车
商品描述

Introduction of PAGOODA varistor:

Series: MYD, MYG, MYL, MYT1

Common size (SMD): 1210, 1206, 0805, 0603 and 0402... Common error: K=+10%

Resistance: Varistors generally do not look at resistance; conventional performance is mainly three parameters:

Varistor voltage V1mA: The resistance conduction voltage is generally selected according to the protected circuit;


The leakage current IL generally refers to the current passing through the resistor when the applied voltage is 83% V1mA. The general requirement is 45; The resistance value is below the ohm level. If the resistance value must be tested, it must be the test resistance value under the specified voltage. The resistance value decreases sharply with the increase of the voltage, which is similar to the logarithmic relationship. Maximum AC voltage (RMS) Uac or maximum DC voltage Ud: generally Uac~064U1mA, Udc~083U1mA.


PAGOODA high-end technology electronic components manufacturers, varistor specifications are complete, can provide samples, quality assurance, comprehensive technical support, welcome to inquire



PAGOODA optocoupler introduction

Optocoupler is abbreviated as OCEP, also known as optoelectronic isolator or optocoupler, referred to as optocoupler. It is a device that transmits electrical signals with light as a medium, usually encapsulating the light-emitting device and the light-receiving device in the same tube. When the input terminal is powered on, the light emitter emits light, and the light receiver generates photocurrent after receiving the light, which flows out from the output terminal, thus realizing the "electrical-optical-electrical" control. The optocoupler, which couples the input signal to the output with light as the medium, has the advantages of small size, long life, no contact, strong anti-interference ability, isolation between output and input, and one-way signal transmission. Wide range of applications in the circuit.

 The main advantages are: one-way signal transmission, electrical isolation between the input end and output end, the output signal has no effect on the input end, strong anti-interference ability, stable operation, no contact, long service life and high transmission efficiency. Widely used in electrical insulation, level conversion, interstage coupling, drive circuit, switch circuit, chopper, multivibrator, signal isolation, interstage isolation, pulse amplifier circuit, digital instrument, long-distance signal transmission, pulse amplifier , Solid State Relay (SSR), instrumentation, communication equipment and computer interface. In a single-chip switching power supply, a linear optocoupler can be used to form an optocoupler feedback circuit, and the duty cycle can be changed by adjusting the current at the control terminal, so as to achieve the purpose of precise voltage regulation and realize signal reception and transfer.

Pingshang Technology is a high-end technology electronic component manufacturer with complete categories and specifications, can provide samples, quality assurance, comprehensive technical support, welcome to inquire


                                                                                                                Founded in 1999, PAGOODA is a supplier of chip capacitors, chip resistors, chip diodes, chip inductors, chip beads and other products.We have exported to many countries including the United States, Mexico, Canada, Spain, Russia, Singapore, Thailand, India, etc.PAGOODA's electronic component products and technologies are contributing to the realization of future applications, such as autonomous driving, renewable energy, 5G communications, robotics, AR/VR, IoT drones, etc., thereby improving the daily lives of people all over the world . What we offer: 1) Good quality control 2) Very competitive price 3) The most advanced technology products 4) The best professional team of SMT electronic components. 5) Smooth communication